Call 07866 426 948 | Free quotation, no obligation
Professional Decorating Services
Landlords - Home Owners - Commercial Units
You need to stop the route cause otherwise the mould will likely return.
To effectively treat mould in a property, the following steps are recommended:
Identify the source of moisture: Find and fix the source of the moisture that is causing the mould.
Ventilation: Ensure that the affected area is well ventilated to allow for proper air flow. Badly ventilated areas will help cause mould such as behind wardrobes as the air sits dormant. This can be particularly troublesome if furniture is positioned against exterior walls and if those walls are poorly insulated.
Click on the image to learn more about it
Treating Mould
What is the best way to treat mould?
The short answer to that is to use an effective mould spray or foam to kill the spores. Personally I use HG mould spray but there are other effective brands on the market. I then use Zinsser stain block prior to painting with a mould resistant paint such as Johnstones Durable Matt, Dulux Diamond Matt or Crown Mould Inhibiting Matt.
Moisture can come from steam in the kitchen and bathroom so it is advisable to keep doors shut when using these rooms, use extractor fans if you have them and open windows to create a natural flow of air. Dehumidifiers can also significantly help and in many cases will solve the problem of too much moisture in the air.
Avoid drying clothes indoors but if you have to then a dehumidifier will draw the moisture in from the wet/damp clothing.
Mould can also be caused due to water ingress ie leaks. It is important to find the source of the leak and stop it otherwise mould and damp will continue to be a problem.
Click on the image to learn more about it
Clean up: Clean up the mould using a specific mould cleaner, being careful not to disturb the mould and release more spores into the air.
Personally I use HG mould spray.
Protective gear: Wear protective gear, such as gloves and a mask, when cleaning up mould to avoid exposure to mould spores.
Dry: Thoroughly dry the affected area to prevent mould from growing back.
Prevention: Implement measures to prevent mould growth in the future, such as controlling humidity levels and promptly addressing any leaks or other sources of moisture.
It is also recommended to seek professional help if the mould problem is extensive or if you have any concerns about your health.
It is advisable to cover affected areas with a stain block (I find Zinsser B.I.N stain blocker the most effective) and then paint over with a mould resistant paint as well?
Covering affected areas with a stain blocking primer and then painting over with a mould-resistant paint can be a good way to treat mould in a property.
Stain blocking primers help to seal the mould and prevent it from bleeding through the paint. A mould-resistant paint contains antimicrobial agents that prevent mould growth and is more durable in damp or humid environments.
However, it is important to note that simply painting over mould will not solve the underlying problem causing it. The source of moisture must be addressed and the affected area thoroughly cleaned and dried before applying the primer and paint to ensure that the mould does not return.
Keeping your property warm is also a necessary way of keeping mould at bay. Obviously this has become a problem as energy costs have become so expensive.
So by killing the mould with effective cleaners, stain blocking and painting with the right products you will be helping to prevent the mould returning.
Feel free to call me if you would like any further advice 07866 426 948 Andy
Click on the image below if you would like to learn more about any of the paints that I use and recommend
